Products
Opportunities
Careers
Join
☎️ Contact Us
🔑 Member Login
0

Your cart is empty

Subtotal:

£0.00

View basket
Checkout
Contact us

DesignBuilder Overheating Training (On Demand)

Training delivery On Demand Competency CPD New Build Non-Domestic
Course length 1 Day
Suitable for Those with experience using DesignBuilder for Dynamic Thermal Modelling.
£240.00 + VAT
7 Hours CPD 

Suitable for: Those with who have experience of using DesignBuilder for Dynamic Simulations.

 

This on demand course will give you the knowledge you need to confidently use DesignBuilder’s overheating assessment tools enabling you to complete overheating assessments using dynamic thermal modelling in the DesignBuilder software. By the end of the training attendees should have a good grasp of how to quantify and reduce the risk of overheating for the main UK and Ireland regulations and schemes using DesignBuilder.

Once completed this course will give you access to join the Elmhurst Overheating Competency Scheme once competency has been assessed, where you will receive;

  • Industry recognition of competence to undertake Overheating risk assessments.
  • Addition to our list of competent Overheating Risk Assessors available on our website.
  • Technical support to members on Overheating regulations and carrying out Overheating Risk Assessments.
  • Updates on future Building Regulation and technical standard changes in regards to Overheating.

*Please note – Although this is on demand course – The link may take up to 3 working days to be received.

  1. Introduction to Overheating
  2. Using DesignBuilder’s TM52 tools
  3. Using DesignBuilder’s TM59 tools
  4. Modelling for BB101 overheating risk

You must be competent at using the DesignBuilder software and have ability to use DesignBuilder’s EnergyPlus calculated natural ventilation analysis tools. This experience could either be via previous attendance on the relevant days of DesignBuilder’s simulation training, or relevant experience DesignBuilder’s calculated natural ventilation modelling tools.

If you do not have this experience you will need to complete Design Builder’s Overheating Prerequisite Training

  • Complete the on demand overheating training course
  • Apply to join the scheme on our website here
  • A competency assessment will be sent for you to complete upon application
  • Subject to satisfactory completion of the competency assessment you will be enrolled onto the only overheating competency scheme where you will benefit from additional recognition for your assessments and other scheme benefits.

Related Items

DEC Calculating Floor Area (On Demand)

£30.00 + VAT
On Demand
This CPD course is designed to provide expert guidance on calculating floor area for Display Energy Certificates (DECs). Understanding and accurately measuring floor area is crucial as it plays a vital role in determining the overall DEC rating. Mistakes in this calculation can significantly impact results and may even lead to audit failures.

Measured Energy Performance (MEP) Competency Training

£350.00 + VAT
On Demand
Learn how to measure the actual performance of a property and compare it against design intent with Measured Energy Performance (MEP)!

DesignBuilder DSM for UK Certification Training (On Demand)

£200.00 + VAT
On Demand
This DSM training builds on the knowledge gained on the DesignBuilder SBEM for UK Certification course and covers the essential information required to quickly and efficiently produce accurate DSM EPCs and BRUKL documents. DBUKC

Introduction to SBEM Online (On Demand)

£30.00 + VAT
On Demand
This online CPD webinar provides a solid introduction to Elmhurst's leading Non-Domestic software, SBEM Online. It also provides 30 Minutes CPD.

Section 63 Competency (On Demand)

£400.00 + VAT
On Demand
Assessors can obtain the relevant competency in Scotland's Section 63 legislation with Elmhurst's online course. This course provides an overview of this legislation and the actions that assessors must take.

Legionella Control for Property Management (On Demand)

£200.00 + VAT
On Demand
This online training course from Elmhurst will equip you with all the necessary skills to undertake inspections and produce professional Legionella reports for clients. You can undertake this course at any time from the comfort of your home or office.

Building Services Level 3 HVAC Systems (On Demand)

£30.00 + VAT
On Demand
The Level 3 HVAC systems CPD Webinar covers various heating topics.

Background Ventilation Assessment of Existing Dwellings (On Demand/Classroom)

From: £895.00 + VAT
Classroom On Demand
Elmhurst’s Background Ventilation Assessment Training equips energy and retrofit professionals with the essential skills and knowledge to conduct Background Ventilation Tests for UK dwellings in line with PAS 2035. ATBVT2025

Level 1 Airtightness Testing (On Demand/Classroom)

From: £1,450.00 + VAT
Classroom On Demand
Elmhurst’s Level 1 Airtightness Testing training offers energy and retrofit professionals the essential skills and knowledge required to conduct full air pressure/airtightness tests for Level 1 UK properties (simple structures up to 4,000 m³). ATBVT2025

DesignBuilder Overheating Training with Dynamic Thermal Modelling (DTM) on Demand

£495.00 + VAT
On Demand
This 1-day on demand course will give you the knowledge you need to confidently use DesignBuilder’s overheating tools enabling you to complete overheating assessments using dynamic thermal modelling in the DesignBuilder software.