Training Calendar

How to carry out Measured Energy Performance Reports (Live Online)

Date: 26th May 2022
Start Time: 10:00am
Location: Online
Duration: 2 hours
Places Left: 3

1.5 Hours CPD

Suitable for: DEAs, Retrofit professionals and OCDEAs (please note only qualified DEAs can carry out MEP reports). 

Course overview:

Learn how to measure the actual performance of a property and compare it against design intent with Measured Energy Performance (MEP)!

During this 1.5 hour course you will learn how to use MEP, which uses ground-breaking SmartHTC technology and specially adapted Design SAP software to calculate the Heat Transfer Coefficient score. This will allow you to accurately assess the thermal performance of a property and see how it performs in-situ.

Our expert tutor will walk you through all the necessary steps, from setting up the temperature sensors to taking meter readings and completing the required energy assessment. The process is similar to conducting an RdSAP assessment with more of an emphasis on gathering real-time data. Therefore this course would particularly suit those involved in retrofit work and energy professionals looking to close the performance gap.

Now is a very exciting time to get involved with Building Performance Evaluation methods, where advanced skills in this area becoming more sought after! 

  *For a full breakdown of the Measured Energy Performance service please visit:

 Course content: 

  • Brief reminder of MEP process.
  • Ellitech Sensor set up.
  • Sensor deployment.
  • Sensor data retrieval
  • Meter readings.
  • Template population.
  • Minimum property information required.
  • Check List 

Cost breakdown: 

£99.00 plus VAT 

Booking a course

Please book online using the calendar. Our Consultancy Team are always happy to provide more information about a course should you require it please call them on 01455 883259

Please Note: The online booking system closes 2 working days prior to each event. In some cases it is still possible to take bookings over the phone the day before an event.

CPD Requirement

All certified energy assessors in the UK must adhere to a mandatory Continuing Professional Development (CPD) policy. Details of which are located in section 7 of the Elmhurst Code of Conduct.

< Back to Calendar

© Elmhurst Energy Systems Ltd 2022. All rights reserved.
Elmhurst Energy Systems Limited is registered in England, Company Number: 02805846